Відео

Love your shop, but mostly your "plan of attack" of doing a project. Makes a lot of sense.

I think it looks clean. i like keeping the rake/stance. appreciate you doing the leg work on the setup, super helpful.

Might be a stupid question but would this method work on 100 series Land Cruiser? (2001) This seems a lot more straightforward than the cruiser videos I’ve found

I’m running a stand alone wideband I’m tuned on 91 pump with 50/50 water alcohol injection and see 10.5-10.7 afr I have plenty of pump and injector what if I run 91 pump and e85 to get a mix of E30 would I see a leaner af at wot such as 11.5?

Another comment. Is there not a tire that would go on the stock rims. With the same profile as the MT. But more street-able.

Looks good. I have to say. I prefer the look of the Mickey Thompson better. But the new ones do the trick.

Looks Amazing!! Killer set up.

Hello. Is suspension good for for drag , possibly making car higher for bigger tires ?

Good job speedy your probably one of the few that wouldn’t worry about taking a small trip and enjoying it as a real car that happens to be stupid fast you bought it enjoy it let the haters hate I doubt they have a 170 it’s nice to see something different than following what everyone else does and deem it cool.

Awesome video, love the details and the steps. You got a like and a follow from me.

Good choice with the PS4S, this is the best overall street tire all things considered (very good dry traction, outstanding wet traction, out of this world hydroplaning resistance, low noise, more than acceptable tread life). Congrats 👍

Does this work on a 2015 dodge charger srt 392 as well?

The spec sheet says that this unit it rated for 24 amps and a 50 amp breaker is recommended. A 50 amp breaker is good for 40 amps with 8 gauge wire for non continuous loads. 30 amp breaker is good for 24 amps, so you should be fine as long as it's on a dedicated circuit.

Not bad.nice profile. Not sure on the outer lip of new wheels though. Like the stock drag wheels the best, but street tires might have trouble hooking up like the M/T's. Either way, nice job, had to be expensive

i see you do a lot of research on whatever part of the car you are working on to bring out the best in that area so instead of running a street/strip tire on the rear why not get lighter rims and track only drags to get the most potential out of the car

Don’t want to be the hater in here, but you got a car I’m sure you paid well over 100k for and you got mix matched tires. Can you get anymore lame!

I do believe the 20s inch rims looks a lot better. I have 20s on my shakedown.

Honestly, not sure about the rims. The set up looks perfect.

Beast looking DEMON 💪💯

Great set up & John knocked it out of the park for ya! Wheels fit & look great & those Michelin PS4's are amazing. I have them on my widebody. Best street tire IMHO

Phenomenal choice Speedy. Great research to aid the decision and keeping the factory style look was genius IMO. Enjoy your car !! Best to you and Mrs Speedy for the 4th of July holiday !

You did your homework bro, and the wheel guy knows his stuff 🔥🔥🔥🔥

Would you recommend a high octane racing fuel additive for a highway cruiser bike? (1996 Kawasaki Vulcan 1500) honestly just looking to get a better gas quality and gas mileage

What is the price on the OEM sensors?

Yup, looks killer cool. Glad you have a new ride to make videos about. Interesting to see what you can do to improve performance in either power or making it grip.

Although I’m not a fan of the devil’s rim design, these look fantastic on your demon. Yes, Dodge should have included an option for a street rim/tire package.

Looks killer. Can you post a link to tire/wheeler dealer you got those from?

Great wheel choice. Refreshing to see something else besides all black wheels. That trend has gotten old.

Looks really sharp! 👍

looks perfect

They look amazing 🔥my 19 challenger hellcat redeye narrow body has 20x10 with 275 40 20 front and 20x11 with 305 35 20 rear

Could you use the trigger mech instead of the valve?

Would be interested in your stocks from go mango

Crazy only a 305 fit in the back. Been running 315's on my narrow body with lowering springs.

Really only matters if you like the new set up. Personally, I would have matched the Michelins up front, instead of having mis-matched manufactures. Not a fan of the Pirellis at all... again, really only matters what you like. To me the wheels look like they came off an SXT V6... if they were all black, may look better.

Very sharp set up bud. I haven't seen any new videos for awhile, I'll have to check out my notifications. Since I last commented I got my shop built and just finished installing 5 each Advantage Lifts, one of them is the side by side. Shop is 60x120x18 with in floor heat and 6 mini splits and 3 large fans for the air conditioning, also epoxied the floor. I must say, it looks amazing! Take care and don't work too hard!!

Absolutely terrible this happened to you but very thankful you posted it. I have, because of your channel, taken extreme measure to make mine much more difficult to steal.

I have a about 450 and mickeys are gone, the street killed them. You have 1600 you must baby it ? Your new set up looks good I was waiting on your video.

Dang those looks really good!! That was a good catch on rear tire height.

Finally a tire guy that knows what he's talking about...

Set up looks great. This way you can have every day fun in addition to drag days.

Always enjoy your videos great choice 👍

I LOVE THIS.

Hey great video, I have a 3rd gen and removed the factory side steps, do you know what mud flaps you are using for the front Thanks

Nice setup looks great. I’ll disagree with you though on the factory tires to me it’s a drag focused car I 100% agree with it coming with the ET streets. For dodge to claim the times it needs to come with that setup OEM. The redeye is the street car…..

I agree with you thats the way it should have been come from the factory. Looks absolutely beautiful.

looks real, real nice! Interested in your old OEM Brass Monkeys if you can ship them!

Good call on the OEM TPMs sensors.... I chased phantom issues on M000 for almost a year because I used aftermarket NTK O2 sensors instead of factory O2 sensors!

I have a 1320 with drag radials and it does get annoying having to clean the rubber dust off the back of the car. Might have to give the pilots a look

Looks great